|
| ENGLISH / 中文 |
EXPLAIN / 解释 |
UNIT / 单位 |
|
|
|
| Dimension Tolerance of Optical Part |
| 光学零件尺寸的公差 |
|
|
|
|
| Diameter Tolerance |
| 直 径 公 差 |
|
| Diameter Tolerance of Optical Part |
| 光学零件厚度的公差 |
|
|
|
| Thickness Tolerance |
| 厚 度 公 差 |
|
| Thickness Tolerance of Optical Part |
| 光学零件厚度的公差 |
|
|
|
|
| Limit scratch and spot quantity of Optical Part polished surface |
| 光学零件表面的划痕和斑点的限制数量 |
|
| 40 / 20 |
(Scratch / Spot) |
| 20 / 10 |
(刮痕 / 污点) |
|
|
|
| Effective light transfer area of Optical Part |
| 光学零件的有效通光区域 |
|
|
|
|
| Surface Figure of Optical Part |
| 光学零件抛光表面与理想平面的偏差值 |
|
|
|
|
| Deviation degree of central position of Optical Part |
| 光学零件中心定位的偏差度 |
|
|
|
|
| Foci Tolerance of Optical Part |
| 光学零件焦距的公差 |
|
|
|
|
| Bevel of Optical Part |
| 光学零件边缘的倒角 |
|
|
|
|
|
|
|
| Centration of optical part |
| 光学零件中心偏心度 |
|
| arc ' |
(arc minute) |
| arc ' |
(弧分） |
|
|
|
| Paralleism of optical part face |
| 光学零件表面平行度 |
|
| arc '' |
(arc second) |
| arc '' |
(弧秒） |
|
|
|
| Full width at half maximum wavelength |
| 半波宽度 |
|
|
|
|
| Flatness of optical part face |
| 光学零件平坦度 |
|
| 2λ per 25 mm |
| 2λ per 25 mm |
|
|
|
| Angle Tolerance of optical part face |
| 光学零件的角度公差 |
|
| arc ' |
(arc minute) |
| arc ' |
(弧分） |
|
|
|
|
|
|
|
|
|
|
| Wavefront Distortion |
| 波 前 畸 变 |
|
| Wavefront Distortion |
| 波前畸变 |
|
| λ/8 @ 632.8nm |
| λ/8 @ 632.8nm |
|
|
|
| Retardation Tolerance |
| 相位延迟公差 |
|
| Retardation Tolerance |
| 相位延迟公差 |
|
|
|
| Intensity Distribution |
| 强 度 分 布 |
|
| The laser power diffused from the optical part to the per square |
| millimeter power intensity |
| 激光功率由光学零件发散在每平方毫米的功率强弱 |
|
|
|
|
|
|
|
|
|
|
| Polarization Coating |
| 偏 振 膜 |
|
|
|
|
| Filter Coating |
 |
A filter coating is an optical coating that attenuates light intensity or changes spectral composition. |
The main purpose is to reduce or limit the light intensity, change the wavelength, block unwanted light, and allow the required wavelength to pass smoothly. |
|
| 滤光膜 |
|
| 滤光膜是一种衰减光强度或改变光谱成分的光学镀膜。 |
| 主要用途是降低或限制光强、改变波长，遮挡不需要的光、使需要的波长可以顺利通过。 |
|
|
|
| Beam Split Coating |
|
A beam split coating is a film that splits the beam of two parts according to requirements and in the specified way. |
The beam split coating mainly including wavelengths bem split coating, light intensity beam split coating, and a Polarization beam split coating. |
|
| 分光膜 |
|
分光膜是一种根据要求和特定的方式把光束分成两部分的薄膜。分光膜主要包括波长分光膜、光强分光膜和偏振分光膜。 |
|
| |
|
|
| Protective Coating |
|
The protective coating is a type of optical coating appiled to prevents oxidation, corrosion, abrasion, and static on the optical part by special material (example SiO2). |
|
| 保护膜 |
|
保护膜是一种由特殊的原料（例如：SiO2）在光学元件表面起到防止氧化、腐蚀、磨损，减 少静电或漏电的光学涂层。 |
|
